Kanto CA-TUKMW

User Manual - Page 13

For CA-TUKMW.

PDF File Manual, 16 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
13
U
U
RCAPHONO
GND
L R L R
SUB
OUT
L R
SUB
OUT
SUB
SUB
Connecting a Subwoofer
TUK is equipped with an RCA connector to provide output signal to a powered subwoofer.
Simply connect a single RCA subwoofer cable from the SUB OUT connection on TUK to the
AUDIO INPUT on your subwoofer. If your sub-woofer has a stereo L / R RCA input, either left
or right inputs will work.
We recommend the Kanto sub6 or sub8 powered subwoofer with crossover and volume
controls. Most quality subwoofers oer these controls, which allow you to customize the
amount of bass you will experience.
Look for details on the Kanto website at: www.kantoaudio.com
Sub Mute
You can mute the sub output on TUK. This can be helpful in situations where
you want to listen to your speakers but don’t want to disturb the neighbors
with sub-bass.
To mute the sub output, press the SUB button. The LED will blink to conrm
the sub output is muted. To un-mute the sub output, press the SUB button
again. The LED will blink to conrm that the sub output has been un-muted.
The sub output will be reactivated upon waking up from standby.
Active Crossover
TUK is equipped with an active crossover lter at 80 HZ to allow for advanced setup with
subwoofers. Activating the crossover will reduce the bass extension of the
main speakers, allowing them to focus on the mid and high frequencies,
while reducing the high frequency output of the SUB OUT port. If your
Sub has an adjustable bandwidth or crossover frequency setting, it can be
adjusted to the highest or most open setting.
Active Crossover is disabled by default. You can activate Active Crossover
by pressing and holding the SUB button for 5 seconds. The front panel
LED will blink twice to indicate that the crossover has been activated. You
can deactivate the crossover by pressing and holding the SUB button
for 5 seconds. The front panel LED will blink once to indicate that the crossover has been
deactivated. The crossover is disabled by default or when power is removed.
Loading ...
Loading ...
Loading ...