Craftsman 32010860-01 circular saw

User Manual - Page 4

For 32010860-01.

PDF File Manual, 60 pages, Download pdf file

Loading ...
Loading ...
Loading ...
SAFETY PRECAUTIONS FOR LASER cont.
6. DO NOT use on surfaces such as sheet steel that have a shiny, reflective surface° The shiny
surface could reflect the beam back at the operator,,
7, ALWAYS be aware that laser light reflected off of a mirror or any other
reflective surfaces can also be dangerous.
I Z_ CAUTION: ALWAYS follow only the instructions contained in this manual when using I
this laser. Use of this feature in any manner other than what appears in this manual may
result in a hazardous radiation exposure
8. DO NOT attempt to modify the performance of this laser device in any way.
This may result in a dangerous exposure to laser radiation°
9. For further information regarding lasers, refer to ANSI - Z13&1
The STANDARD FOR THE SAFE USE OF LASERS, available from the
Laser Institute of America (407) 380-1553.
WORK AREA SAFETY
1. ALWAYS keep your work area clean and well lit. Cluttered benches and
dark areas invite accident&
2. DO NOT operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite the dust or fumes,
3. ALWAYS keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
1. Double insulated tools are equipped with a polarized plug (one blade
is wider than the other.) This plug will fit in a polarized outlet only one
way. if the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install a polarized
outlet. Do not change the plug in any way.
2. Double insulation _ eliminates the need for the three-wire grounded power
cord and grounded power supply system. Applicable only to Class II
(double insulated) tools.
3. Before plugging in the too!, BE SURE that the outlet voltage supplied is
within the voltage marked on the too!'s data platen DO NOT use "AC only"
rated tools with a DC power supply,
4. ALWAYS avoid body contact with grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is grounde&
Loading ...
Loading ...
Loading ...