Loading ...
Loading ...
Loading ...
GENERAL
......................."....... oSce"[
I WARNmNG: To avoid accidents, ALWAYS disconnect the tool from the power s
BEFORE cleaning or performing any maintenance,
All parts represent an important part of the double insulation system and should be serviced
only at a Sears Service Center..
Avoid using solvents when cleaning plastic parts.. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use_ Use clean
cloths to remove dirt, carbon dust, etc..
............................................. i, ,, u,, ,,ira,l,,
WARNING: DO NOT at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come in contact with plastic parts_ They contain chemicals
that can damage, weaken or destroy plastic..
It is a known fact that electric tools are subject to accelerated wear and possible premature
failure when they are used to work on fiber glass boats and sports cars, wallboard, spackling
compounds or plaster. The chips and grindings from these materials are highly abrasive to
electrical tool parts, such as bearings, brushes, commutators, etco Consequently, it is not
recommended that this tool be used for extended work on any fiber glass material, wallboard,
spackling compound, or plaster. During any use on these materials, it is extremely important
that the tool is cleaned frequently by blowing with an air jet..
LUBRICATION
All of the bearings in this tool are lubricated with a sufficient amount of high-grade lubricant for the
life of the tool under normal operating conditions.Therefore, no further lubrication is required°
I _ WARNING: ALWAYS wea; Sa;eiY goggles or safety glasses wiliorsMe;hields when I
using, this tool or blowing dust. tf operation is dusty, also wear a dust mask.
DOUBLE INSULATION
Double insulation is a concept in safety in electric power tools, which eliminates the need for the
standard 3-wire grounded power cord.. All exposed metal parts are isolated from the internal
motor components with protecting insulation. Double insulated tools do not need to be grounded.
25
Loading ...
Loading ...
Loading ...