Loading ...
Loading ...
WARNING: BE SURE to read and understand all instructions_
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious personal injury.
: .... i,, [ .......... .......................
SAFETY PRECAUTIONS FOR LASER
This saw has a built-in laser light,, The laser is a Class ilia and emits output power of a maximum
2,,5mW and 400nm - 700nm wavelengths. These lasers do not normally present an optical hazard.
However, DO NOT stare at the beam because it can cause flash blindness.
IMPORTANT: The following label is on your saw. It indicates
where the laser light is emitted by the saw. ALWAYS BE AWARE
of its location when using the saw and ALWAYS MAKE SURE
that any bystanders in the vicinity of use are made aware
of the dangers of looking directly into the laser.
AVOID EXPOSURE
LASER RADIATION EMITTED
FROM THIS APERTURE
i¢k WARNING: LASER LIGHT. LASER RADIATION Avoid Direct Eye Exposure°
DO NOT Stare into beam. Only turn laser beam on when tool is on the work piece.
Class ltla Laser Product
' ' i.i.......................
WARNING: DO NOT stare directly at the laser beam. A hazard may exist if you
deliberately stare into the beam_ ALWAYS follow the following safety precautions when
using this saw°
1. The tinted glasses that were included will enhance the laser light in bright light conditions,
DO NOT wear these glasses if they interfere with the safe operation of this saw_
2. NEVER aim the beam at any person or object other than the workpieceo
3. The laser beam can be harmful to the eyes, ALWAYS avoid direct eye
exposure_ DO NOT look directly into the laser beam output aperture
during operation,,
4. The laser on the saw is not a toy. ALWAYS keep out of the reach of children°
The laser light emitted from this device SHOULD NEVER be directed towards
any person, for any reason.
5. ALWAYS be sure the laser beam is aimed at a sturdy workpiece (such as wood or rough
coated surfaces) that does not have a reflective surface
Loading ...
Loading ...
Loading ...