Loading ...
Loading ...
Loading ...
Before using for the first time en
17
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
The motor will switch off if
¡ too large a quantity is processed.
¡ a tool or accessory is blocked.
Before using for the first time
Before using for the
first time
Before using for the first time
Prepare the appliance for use.
Preparing the appliance
1. Press the release button and raise
the swivel arm until it engages.
→"Moving the swivel arm",
Page17
2. Turn the bowl clockwise and re-
move.
→"Removing bowl", Page17
3. Clean all parts that come into con-
tact with food before using for the
first time.
→"Cleaning and servicing",
Page21
4. Put the cleaned and dried parts
out ready for use.
Basic operation
Basic operation
Basic operation
Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
rewinder
1. Pull the power cable out to the re-
quired length and slowly let go.
2. To shorten the cable,
‒ pull the cable,
‒ allow the cable to wind up,
‒ pull the cable out again.
Note:Do not push the cable in by
hand. If the cable jams, pull right out
and let it wind up again.
Moving the swivel arm
1. Press the release button and raise
the swivel arm until it engages.
→Fig.
6
a The swivel arm is fixed in posi-
tion2.
2. Press the release button and move
the swivel arm down until it en-
gages in the vertical position.
→Fig.
7
a The swivel arm is fixed in posi-
tion3.
Inserting bowl
1. Place the bowl in the base unit.
→Fig.
8
Use the recesses on the base unit.
2. Turn the bowl anticlockwise until it
engages.
→Fig.
9
Removing bowl
Turn the bowl clockwise and re-
move.
→Fig.
10
Inserting tools
1. Select the tool required.
→"Overview of tools", Page15
2. Press the tool into the main drive
until it engages.
→Fig.
11
Loading ...
Loading ...
Loading ...