Loading ...
Loading ...
Loading ...
113
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
Fixed PCM O Select whether to x input signals to PCM (except
multi-channel PCM) when you select "HDMI",
"COAXIAL", or "OPTICAL" in the "Audio Select"
setting. Set this item to "On" if noise is produced or
truncation occurs at the beginning of a track when
playing PCM sources. Select "O" normally.
• Each time the "Audio Select" setting is changed,
the setting is restored to "O".
• The setting cannot be changed when "TUNER", "NET", "USB", or "BLUETOOTH" input is
selected.
Hardware
HDMI
Change the settings of the HDMI function.
Setting Item Default Value Setting Details
HDMI CEC O Setting this to "On" enables the input selection link
and other link functions with HDMI-connected CEC-
compatible device.
"On": When this function is used
"O": When this function is not used
When this setting is changed, turn o and then on
again the power of all connected devices.
• Depending on the TV to use, a link setting may
be required on the TV.
• Setting this to "On" and closing the operation
screen will display the name of the connected
CEC-compatible device and "CEC On" on the
main unit’s display.
• When this function is set to "On", the power
consumption in standby state increases,
however, the increase in power consumption is
minimized by automatically entering the HYBRID
STANDBY mode where only the essential circuits
operate.
• If you operate the MASTER VOLUME dial on the
main unit when this setting is "On" and audio is
output from the TV speakers, audio will be output
also from the speakers connected to this unit. To
output audio from only either of them, change the
setting of this unit or TV, or reduce the volume of
this unit.
• If abnormal behavior is observed when this is set
to "On", set it to "O".
• If a connected device is not CEC-compatible, or
if you are not sure whether it is compatible, set
it to "O".
Loading ...
Loading ...
Loading ...