Loading ...
Loading ...
Loading ...
11
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
1. INPUT SELECTOR dial: Switch the input to be played.
2. DIMMER button: You can switch the display o or adjust the brightness of the
display in three steps.
3. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to
turn the display o.
4. ZONE 2-ON/OFF button: Switches the multi-zone function on/o. ( p76)
5. ZONE 2-CONTROL button: Controls the multi-zone function. ( p76)
6. HOME MENU button: Displays the Home. ( p102, 120, 125)
7. Display ( p12)
8. Cursor buttons ( / / / ) and ENTER button: Select the item with the
cursors and press ENTER to conrm. Use them to tune to stations when using
TUNER. ( p70)
9. NETWORK indicator: This lights when "NET" is selected with the input
selector and the unit is connected to the network. Lights up when any of the
following functions is working or enabled in standby state of this unit. When
this indicator is lighting, the power consumption in standby state increases,
however, the increase in power consumption is minimized by entering the
HYBRID STANDBY mode where only the essential circuits operate. It does not
light when ZONE 2 is on, however.
– HDMI CEC ( p113)
– HDMI Standby Through ( p114)
– USB Power Out at Standby ( p115)
– Network Standby ( p115)
– Bluetooth Wakeup ( p116)
10.
MCACC indicator: This lights when you have enabled the speaker calibration
made with MCACC. ( p121, 133)
11.
Remote control sensor: Receives signals from the remote controller.
• The signal range of the remote controller is within about 16´/5 m, at an
angle of 20° on the perpendicular axis and 30° to either side.
12.
RETURN button: Returns the display to the previous state.
13.
MASTER VOLUME
14.
STANDBY/ON button
15.
PHONES jack: Headphones with a standard plug (ø1/4"/6.3 mm) are
connected.
16.
SETUP MIC jack: The supplied speaker setup microphone is connected.
( p121, 133)
17.
TUNER button: Switches the input to be played to "TUNER". Also, pressing
this button repeatedly switches the input between "AM" and "FM".
18.
PERSONAL PRESET 1/2/3 buttons: Registers the current setting conditions
such as input selector, listening mode, etc. or call the registered settings.
( p78)
19.
Listening mode button: Switches the listening mode. ( p83)
20.
USB port: A USB storage device is connected so that music les stored in it
can be played. ( p57) You can also supply power (5 V/500 mA) to USB
devices with a USB cable.
21.
AUX INPUT jack: Connect a mobile music player, etc. using a stereo mini plug
cable (ø1/8″/3.5 mm).
Loading ...
Loading ...
Loading ...