Loading ...
Loading ...
Loading ...
28 29
How to Change Parts
How to Replace the Circuit Board:
1. Turn the power off at the breaker and unplug the Range Hood.
2. Remove all screws from the top of the circuit board cover.
3. Take a picture of the wiring layout (this will help you put the circuit board back
together properly).
4. Remove the wiring connected to the circuit board.
5. Remove the screws from the circuit board.
6. Replace the wiring and screws to reassemble the new circuit board per the
diagram below.
Note: Never work on or clean the range hood while power is ON. Always unplug
the unit or swtich the electrical breaker to the off position.
Installation Tutorial Video
How to Change Parts
Replacing the Light Bulbs in Your Range Hood:
Use 20 watt MR11 Halogen Bulb or a 2.5 watt LED Bulb for replacement.
1. Remove baffles.
2. Gently press light casting out until it falls out of the socket, disconnect the plug
wires.
3. Press both sides of teh mounting clip to remove the light bulb (be certain not to
touch the bulb).
4. Pull light from the receptacle plug.
6. Press mounting clip back into position.
7. Reconnect light plug connection.
8. Press light assembly into the socket.
Note: Never work on or clean the range hood while power is ON. Always unplug
the unit or swtich the electrical breaker to the off position.
Loading ...
Loading ...
Loading ...