Loading ...
Loading ...
Loading ...
USING YOUR REFRIGERATOR
30
PREVIEW GRAB-N-GO
On some models
The PreView Grab-N-Go
compartment allows for easy
access to commonly used food
items.
PREVIEW GRAB-N-GO
COMPARTMENT
On some models
To access the PreView Grab-N-
Go compartment, lightly press the
button on the right refrigerator
door handle to open the door.
PREVIEW FUNCTION
On some models
The PreView function on the Grab-
N-Go lets you see if you’re running
low on frequently used items like
beverages and snacks, without
opening the refrigerator door.
1
Knock twice on the glass to turn
the LED light inside the Grab-N-
Go on or oç.
The LED light turns oç
automatically after ten seconds.
v The PreView function is disabled when the right
refrigerator door is open, for two seconds after closing
the door, and when the ice dispenser is in use.
v Knock near the center of the glass. Knocking near
the edges of the glass may not activate the PreView
function properly.
v Knock hard enough that the knocking sound is audible.
v The PreView function may activate if a loud noise
occurs near the refrigerator.
GRAB-N-GO CASE On some models
To open the Grab-N-Go case, slightly push the marked
area to pop it open. The Grab-N-Go Case is removable
for easy cleaning and adjustment.
1
To remove the Grab-N-Go case, lift up and pull out.
To replace the Grab-N-Go case, line the tabs on the
Grab-N-Go case with the slots on the door and push
down until the case snaps into place.
Open Removing Assembling
GRAB-N-GO LOWER SHELF On some models
The Grab-N-Go lower shelf is removable for easy
cleaning.
1
To remove the lower shelf, lift the shelf retainer up and
out.
Remove the two screws from the shelf and pull it
straight out.
3
Reverse procedure to replace.
1
2
3
Loading ...
Loading ...
Loading ...