Loading ...
Loading ...
Loading ...
REFRIGERATOR INSTALLATION
12
NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
REMOVING AND REPLACING HANDLES CONTINUED
NOTE: Handle appearance may vary from the illustrations
on this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with a ê in. Allen wrench and remove the
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
Replacing Freezer Drawer Handle
Place the handle on the door by otting the handle
footprints over the mounting fasteners and tightening
the set screws with a ê in. Allen wrench.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
WARNING
When assembling or disassembling the handles:
v Grasp the handle ormly to ensure it will not drop or
cause injury.
v Prevent the handle from swinging toward nearby
people or animals.
v Insert the bracket hole of the handle into the
stopper bolt of the door exactly, then assemble the
set screws to ox the handle in place.
v Check for any gap between the door and handle
after the handle is oxed in place.
Loading ...
Loading ...
Loading ...