Loading ...
Loading ...
Loading ...
Setting the Clock
FEATURE OVERVIEW
• Setting the Clock
• Changing between 12 or 24
hour display
LIQII
OoflveQtion OVen
I 2 3
4
7 I $
Setting the Clock
The CLOCK SET _ pad is used to set the clock. The clock
may be set for 12 or 24 hour time of day operation. The clock has
been preset at the factory for the 12 hour operation. When the
range is first plugged in, or when the power supply to the range has
been interrupted, the timer in the display will flash with "PF" (power
failure, See Fig. 1).
INSTRUCTIONS
To set the clock (example below for 1:30):
1. Press _. "CLO" will appear in the display (Fig. 2).
.
PressG G [Z)padstosetthet,=eo,dayto,:30
(Fig. 3). "CLO" will appear in the display. Press "CLO"
PRESS
will disappear and the clock will start (Fig. 4).
Changing between 12 or 24 hour time of day display:
1. Press and hold _ for 6 seconds (Fig. 3). While holding the
pad down the current time of day will remain and "CLO" will
disappear from the display (Fig. 4). CONTINUE holding the pad
until a beep is heard.
_for 6 seconds
2. The display will show either "12:00" (Fig. 5) or "24:00" (Fig. 6).
3. Press to switch between the 12 and 24 hour time of day
display. The display will show either "12:00" (Fig. 5) or "24:00"
(Fig. 6).
4. PressQtoacceptthechangeorpress_torejectthe Oor_
change.
5. Reset the correct time as described in To set the Clock above.
Please note that if the 24 hour time of day mode was chosen,
the clock will now display time from 0:00 through 23:59 hours.
Figure 1
DISPLAY
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
r
13
Loading ...
Loading ...
Loading ...