Loading ...
Loading ...
Loading ...
ENGLISH
17
ninjakitchen.com
16
ninjakitchen.com
Broil (Not available on all models)
1 Place cooking pot in the unit with the
indent on the pot aligned with the bump
on the main unit. Place ingredients in the
pot. Ensure the splatter shield is in place,
then close the hood.
2 Press the BROIL button. The default
temperature setting will display. Use the
set of arrows to the left of the display to
adjust the temperature up to 500°F.
3 Use the set of arrows to the right of the
display to adjust the cook time, in 1-minute
increments up to 30 minutes, or, if using
the thermometer, refer to the Using the
Foodi™ Smart Thermometer section.
4 Press START/STOP to begin. (The unit
does not preheat in Broil mode.)
5 When cook time is complete, the unit will
beep and END will appear on the display.
Dehydrate (Not available on all models)
1 Place cooking pot in the unit with the
indent on the pot aligned with the bump
on the main unit. Place a single layer of
ingredients in the pot. Then place the
crisper basket in the pot on top of the
ingredients and add another layer of
ingredients to the basket. Ensure the
splatter shield is in place, then close
the hood.
2 Press the DEHYDRATE button. The
default temperature setting will display.
Use the set of arrows to the left of the
display to adjust the temperature up
to 195°F.
3 Use the set of arrows to the right of the
display to adjust the dehydration time, in
15-minute increments, up to 12 hours.
4 Press START/STOP to begin. (The unit
does not preheat in Dehydrate mode.)
5 When dehydration time is complete, the
unit will beep and END will appear on
the display.
USING THE NINJA® FOODI® SMART XL GRILL – CONT.
NOTE: To check your food’s internal
doneness, press MANUAL for 2 seconds
and the food’s internal temperature will
appear on the screen. Press and hold
button again to exit mode.
REPLACEMENT PARTS
To order additional parts and accessories, visit ninjaaccessories.com or contact Customer
Service at 1-877-646-5288. So we may better assist you, please register your product
online at registeryourninja.com and have the product on hand when you call.
CLEANING YOUR NINJA® FOODI® SMART XL GRILL
The unit should be cleaned thoroughly
after every use. Always let the appliance
cool before cleaning.
• Unplug the unit from the wall outlet
before cleaning. Keep the hood open
after removing your food to allow the
unit to cool quicker.
• The cooking pot, grill grate, crisper
basket, splatter shield, cleaning brush,
and any other included accessories
are dishwasher safe, except the
thermometer. DO NOT place the
thermometer in the dishwasher.
• For the best dishwasher cleaning
results, we recommend rinsing the grill
grate, crisper basket, splatter shield, and
any other accessories with warm water
before placing them in the dishwasher.
• If hand-washing, we recommend using
the included cleaning brush to help
wash the parts. Use the opposite end
of the cleaning brush as a scraper to
assist with releasing baked-on sauces
or cheese. Air-dry or towel-dry all parts
after hand-washing.
• If food residue or grease are stuck on
the grill grate, splatter shield, or any
other removable part, soak in warm
soapy water before cleaning.
• Clean the splatter shield after every use.
Soaking the splatter shield overnight
will help soften the baked-on grease.
After soaking, use the cleaning brush
to remove the grease from the stainless
steel frame and front tabs.
• Deep clean the splatter shield by
putting it in a pot of water and boiling
it for 10 minutes. Then, rinse with room
temperature water and allow to dry
completely.
• The Foodi Smart Thermometer and holder
are hand-wash only. DO NOT immerse any
part of the thermometer in water or any
other liquid. We recommend cleaning with
a damp cloth only.
NOTE: NEVER use abrasive tools or
cleaners. NEVER immerse the main unit
in water or any other liquid.
NOTE: DO NOT use liquid cleaning
solution on or near the thermometer
jack. We recommend using compressed
air or a cotton swab to avoid damaging
the jack.
Loading ...
Loading ...
Loading ...