Loading ...
Loading ...
Loading ...
ENGLISH
18
ninjakitchen.com
19
ninjakitchen.com
TROUBLESHOOTING
Add Food” appears on the control panel display.
The unit has completed preheating and it is now time to add your ingredients.
“Shut Lid” appears on the control panel display.
The hood is open and needs to be closed for the selected function to start.
“Plug In” appears on the control panel display.
The thermometer is not plugged into the jack on the right side of the control panel. Plug
the thermometer in before proceeding. Press the thermometer in until you hear a click.
“PRBE ERR” appears on the control panel display.
This means the unit timed out before food reached the set internal temperature.
As a protection for the unit, it can run for only certain lengths of time at specific
temperatures.
“E” appears on the control panel display.
The unit is not functioning properly. Contact Customer Service at 1-877-646-5288. So we
may better assist you, please register your product online at registeryourninja.com and
have the product on hand when you call.
Why is my food overcooked or undercooked even though I used the thermometer?
It is important to insert the thermometer lengthwise into the thickest part of the
ingredient to get the most accurate reading. Make sure to allow food to rest for
3–5 minutes to complete cooking. For more information, refer to the Using the Foodi™
Smart Thermometer section.
Why does the preheat progress bar not start from the beginning?
When the unit is warm from previously being used, it will not require the full preheating time.
Can I cancel or override preheating?
Preheating is highly recommended for best results, but you can skip it by selecting the
PREHEAT button after you press the START/STOP button.
Should I add my ingredients before or after preheating?
For best results, let the unit preheat before adding ingredients.
Why is my unit emitting smoke?
When using the Grill function, always select the recommended temperature setting.
Recommended settings can be found in the Quick Start Guide and in the Inspiration
Guide. Make sure the splatter shield is installed.
How do I pause the unit so I can check my food?
When the hood is opened during a cooking function, the unit will automatically pause.
Will the thermometer grip melt if it touches the hot grill grate?
No, the grip is made of a high-temperature silicone that can handle the Ninja® Foodi®
Smart XL Grill’s high temperatures.
My food is burned.
Do not add food until recommended preheat time is complete. For best results, check
progress throughout cooking, and remove food when desired level of brownness has been
achieved. Remove food immediately after the cook time is complete to avoid overcooking.
Why did a circuit breaker trip while using the unit?
The unit uses 1760 watts of power, so it must be plugged into an outlet on a 15-amp
circuit breaker. Using an outlet on a 10-amp breaker will cause the breaker to trip. It is
also important that the unit be the only appliance plugged into an outlet when in use.
To avoid tripping a breaker, make sure the unit is the only appliance plugged into an
outlet on a 15-amp breaker.
Why does the unit have a 1–9 scale for the Beef Preset?
Perception of what a specific internal doneness looks like diers from person to person,
even restaurant to restaurant. The 1–9 scale provides a wide range of options for each
doneness level so you can customize doneness to your liking.
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the
original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for
a period of one (1) year from the date of purchase when it is used under normal household
conditions and maintained according to the requirements outlined in the Owner’s Guide,
subject to the following conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole
discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months
following the receipt date of the replacement unit or the remainder of the existing
warranty, whichever is later. SharkNinja reserves the right to replace the unit with one
of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades,
blender bases, removable pots, racks, pans, etc.), which require regular maintenance
and/or replacement to ensure the proper functioning of your unit, are not covered by
this warranty. Replacement parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required
maintenance (e.g., failure to keep the well of the motor base clear of food spills and
other debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include
damages caused in the process of shipping, altering, or repairing the SharkNinja
product (or any of its parts) when the repair is performed by a repair person not
authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, visit ninjakitchen.com/support for product care and maintenance
self-help. Our Customer Service Specialists are also available at 1-877-646-5288 to assist
with product support and warranty service options, including the possibility of upgrading
to our VIP warranty service options for select product categories. So we may better assist
you, please register your product online at registeryourninja.com and have the product on
hand when you call.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $20.95 (subject to change) will be charged when SharkNinja ships
the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the
receipt as proof of purchase. We also ask that you register your product online at
registeryourninja.com and have the product on hand when you call, so we may better
assist you. A Customer Service Specialist will provide you with return and packing
instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
ONE (1) YEAR LIMITED WARRANTY
Loading ...
Loading ...
Loading ...