Loading ...
Loading ...
Loading ...
19
INSTALLATION INSTRUCTIONS - DRYER
General installation
1 Connect the exhaust duct to the outside exhaust
system. Use of a 4” (102 mm) clamp (item A) is
recommended to connect the dryer to the exhaust vent
system. Use metal foil tape to seal all other joints.
2 Use a carpenter’s level to level your dryer front-to-back
and side-to-side.
3 Use adjustable pliers to adjust the leveling legs so the
dryer is level front-to-rear and side-to-side, and stable
corner-to-corner.
4 Press down on alternate corners and sides and feel for
the slightest movement. Adjust the appropriate leg(s) so
the dryer sits solidly on the floor on ALL four legs. Keep
the leveling leg extension at a minimum for best
performance of the dryer.
A
5 Plug the power cord into a grounded outlet.
6 Turn on the power at the circuit breaker/fuse box.
7 Read the Use & Care Guide provided with the dryer. It
contains valuable and helpful information that will save
you time and money.
8 If you have any questions during initial operation,
please review the “Avoid Service Checklist” in your Use &
Care Guide before calling for service.
9 Place these instructions in a location near the dryer for
future reference.
IMPORTANT
Be sure the power is off at a circuit breaker/fuse box
before plugging the power cord into an outlet.
wall receptacle
Do not, under any
circumstances, cut,
remove , or bypass
the grounding prong.
grounded plug
Limited Warranty
Smart Choice
®
Parts and Accessories are
warranted to be free from defects in material
and workmanship for a period of 90 days from
date of purchase. If this product is found to be
defective, return to place of purchase for
replacement. Smart Choice
®
Parts & Accessories
shall not be liable for damages or delays caused
by defects in material or workmanship,
improper installation, consequential loss,
service call costs, installation or reinstallation
costs, or by failure due to normal wear.
Made In The USA With Globally
Sourced Components