Loading ...
Loading ...
Loading ...
18
INSTALLATION INSTRUCTIONS - Gas Dryer
Gas Connection
Open position
to dryer
from gas supply
1 Ensure the manual gas supply shut off valve is in the
manometer is not available, test all connections
by using the supplied leak detection solution.
Open the shutoff valve in the gas supply line to
allow gas to flow through the pipe.
minutes for gas to move through the gas line.
WARNING
flame.
be
installed by a qualifi ed gas technician.
The supply line must be equipped with an approved
manual shutoff valve. This valve should be located in the
same room as the dryer and should be in a location that
allows ease of opening and closing. Do not block access
to the gas shutoff valve.
2 Identify the thread size of the shut off valve.
Apply pipe thread sealant to the male iron pipe threads on
the union and thread the iron pipe thread into the shutoff
Apply pipe thread sealant to the male iron pipe threads on
the union and thread the iron pipe thread into the shutoff
3 Attach the flexible gas line connector to the flare union
female flare nut of the flexible gas supply line onto
on the back of the dryer and
Attach the other end of the flexible gas line connector
to
threading the other end of the female flare nut
of the flexible gas supply line onto the male flare
All connections must be wrench-tightened
Flare
Union
Flare
Union
GAS FLOW
Manual
Shutoff
Open
Flexible
Nipple
OFF position and remove the shipping cap from the
gas pipe at the rear of the dryer.
Loading ...