Smart Choice LKITGASST Gas Steam Dryer & Washer Install Kit

User Manual - Page 10

For LKITGASST.

PDF File Manual, 19 pages, Read Online | Download pdf file

LKITGASST photo
Loading ...
Loading ...
Loading ...
10
IMPORTANT SAFETY INSTRUCTIONS - DRYER
WARNING
For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent
property damage, personal injury or loss of life. Do not store or use gasoline or other flammable vapors and liquids in the
vicinity of this or any other appliance.
CAUTION
EXCESSIVE WEIGHT HAZARD
To avoid back or other injury, have more than one
person move or lift the appliance.
Read all of the following instructions before installing and using this appliance:
Destroy the carton and plastic bags after the dryer is unpacked. Children might use them for play. Cartons covered with
rugs, bedspreads, or plastic sheets can become airtight chambers causing suffocation. Place all materials in a garbage
container or make materials inaccessible to children.
Clothes dryer installation and service must be performed by a qualified installer, service agency or the gas supplier.
Install the clothes dryer according to the manufacturer’s instructions and local codes.
The electrical service to the dryer must conform with local codes and ordinances and the latest edition of the National
Electrical Code, ANSI/NFPA 70, or in Canada, the Canadian electrical code C22.1 part 1.
The gas service to the dryer must conform with local codes and ordinances and the latest edition of the National Fuel Gas
Code ANSI Z223.1, or in Canada, CAN/ACG B149.1-2000. An individual manual shut-off valve must be installed within 6
ft (1.83 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1/NFPA 54.
The dryer is designed under ANSI Z 21.5.1 or ANSI/UL 2158 - CAN/CSA C22.2 No. 112 (latest editions) for HOME USE
only. This dryer is not recommended for commercial applications such as restaurants, beauty salons, etc.
Do not install a clothes dryer with flexible plastic or flexible foil venting material. Flexible venting materials are known to
collapse, be easily crushed and trap lint. These conditions will obstruct clothes dryer air flow and increase the risk of fire.
Do not stack a dryer on top of washer already installed on pedestal. Do not stack dryer on top of another dryer. Do not
stack washer on top of dryer. Do not stack washer on top of another washer. Do not stack dryer on top of washer without
use of manufacturer approved and correctly installed stacking kit appropriate for your model.
The instructions in this manual and all other literature included with this dryer are not meant to cover every possible
condition and situation that may occur. Good safe practice and caution MUST be applied when installing, operating and
maintaining any appliance.
Pre-Installation Requirements
Tools and materials needed for installation:
Adjustable pliers
Phillips, straight, & square bit
screwdrivers
Adjustable wrench
Pipe wrench for gas supply (gas dryer)
LP-resistant thread tape (for natural
gas or LP supply, gas dryer)
Carpenter’s level
External vent hood
4-inch (102 mm), rigid metal or
semi-rigid metal exhaust duct work
4 in. (102 mm) clamp
Gas line shutoff valve (gas dryer)
½ NPT union flare adapters (x2)
and flexible gas supply line (gas dryer)
Metal foil tape (not duct tape)
WARNING - RISK OF FIRE
WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any
phone in your building.
Clear the room, building or area of all occupants.
Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier’s instructions.
If you cannot reach your gas supplier, call the
fire department.
Save these instructions for
future reference.
Loading ...
Loading ...
Loading ...