Loading ...
Loading ...
Loading ...
Yournewtractorhasbeenassembledat the factory with exception of those parts left
unaseembled for shipping purposes. To ensure safe and proper operation of your tractor
all parts and hardware you assemble must be tightenee, securely:.use the corr,ect tools
as necessary to insure proper tightness. Heview the vieeo casset'[e before you eegm.
TOOLS REQUIRED FOR
ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes you need
are listedbelow.
(1) 9/16" wrench (1) 3/4" Socket w/
(1) 1/2" wrench drive rachet
(1) Utilityknife (1) PhillipsScrew-
(1)Pliers driver :
(1) _re pressure gauge
When right or left hand is mentioned in
this manual, it means, from your point of
view, when you are in the operating posi-
tion (seated behind the steering wheel).
TO REMOVE TRACTOR FROM
CARTON
UNPACK CARTON
• Remove all accessible loose pads and
parts boxes from shipping carton (See
page 6).
• Cut, from top to bottom, along lines on
all four comers of shipping carton, and
lay panels flat.
• Remove mower and package materials.
Check for any additional loose parts or
boxes and remove.
BEFORE ROLLING TRACTOR OFF
SKID
A'n'ACH STEERING WHEEL
• Remove hex bolt, lock washer and large
flat washer from steering shaft.
• Position front wheels of the tractor so
they are pointing straight forward.
• Slide the steering sleeve over the steer-
ing shaft.
• Align tabs and press steering sleeve
extension into bottom of steering wheel.
• Position steering wheel so cross bars
are horizontal (left to right) and slide
onto steering wheel adapter.
• Secure steering wheel to steering shaft
with he)( bolt, lock washer and large flat
washer previously removed. Tighten
securely.
• Snap steering wheel insert into center
of steering wheel.
• Remove protective materials from trac-
tor hood and grill.
I l Sn
Wheel Insert
_.. Hex Bolt
_..._ L_k Washer
Large Flat
Washer
Steering
Steering Wheel
Wheel Adapter
Steering _ Tabs
Sleeve I
Extension
Shaft
Steering
Sleeve
IMPORTANT: Check for and remove any
staples in skid that may puncture tires
where tractor is to roll offskid.
TO ROLL TRACTOR OFF SKID (See
Operation section for location and
function of controls)
• Press lift lever plunger and raise attach-
ment lift lever to its highest position.
• Release parking brake by depressing
clutch/brake pedal.
• Place freewheel control in freewheeling
position to disengage transmission (See
"TO TRANSPORT" in the Operation
section of this manual).
• Roll tractor forward off skid.
8
Loading ...
Loading ...
Loading ...