Loading ...
Loading ...
Loading ...
NOTE:Pra-assemble weld nut to latch
hook by inserting weld nut from the top
with hook pointing down.Tighten hard-
ware securely.
• Raise and hold deflector shield in up-
right position.
• Place front of mulcher plate over front of
mower deck opening and slide into
place, as shown.
.- Hook front latch into hole on front of
mower deck.
• Hook rear latch into hole on back of
mower deck.
_CAUTION: Do not remove discharge
guard from mower. Raise and hold guard
when attaching mulcher plate and allow it
to rest on plate while in operation.
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in
a safe place. Your mower is now ready for
discharging or installation of optional
grass catcher accessory.
NOTE: It is not necessary to change
blades. The mulcher blades are designed
for discharging and bagging also.
Weld Nut
Hook Points
Lock
Washer
Latch
Weld
Nut
Latch
Lock
Washer
Mulcher '_,------Screw
Plate
Deflector ._
Shield - ( ,_
_Latch
Hooks
I/CHECKLIST
Please review the following checklist:
,/ All assembly instructions have been
completed.
,/No remaining loose parts in carton.
•/ Battery is propedy prepared and
charged. (Minimum I hour at 6 amps).
,/Seat is adjusted comfortably and tight-
ened securely.
,/All tires are properly inflated. (For ship-
ping purposes, the tires were overinflat-
ed at the factory).
,/Be sure mower deck is properly leveled
side-to-side/front-to-rear for best cutting
results. ('lires must be properly inflated
for leveling).
/ Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
/ Check wiring. See that all connections
are still secure and wires are properly
clamped.
•/ Before driving tractor, be sure freewheel
control is in ddve position.
While learning how to use your tractor,
pay extra attention to the following impor-
tant items:
,./Engine oil is at proper level.
/ Fuel tank is filled with fresh, clean, regu-
lar unleaded gasoline.
,f Become familiar with all controls - their
location and function. Operate them
before you start the engine.
,f Be sure brake system is in safe operat-
ing condition.
/ It is important to purge the transmission
before operating your tractor for the first
time. Follow proper starting and trans-
mission purging instructions (See "TO
START ENGINE" and "PURGE TRANS-
MISSION" in the Operation section of
this manual).
11
Loading ...
Loading ...
Loading ...