Loading ...
Loading ...
Loading ...
PelPro Pellet Stove • 7103-171E • January 9, 2020
pelprostoves.com
32
Troubleshooting
Troubleshooting
Symptom Possible Cause Corrective Action
Igniter does not
turn o
Igniter short circuit. The fuse will be blown and
upon replacement of the fuse, the igniter will
remain on when Stove has power.
Inspect wires, blowers, and power cord to nd
cause of short circuit. Replace board and failed
component.
Feed motor does
not shut o
Feed motor short circuit. The fuse will be blown
and upon replacement of the fuse, the feed motor
will remain on when Stove has power.
Open hopper to stop the feed motor.
Inspect wires feed motor, control board, and power
cord to nd source of short circuit. Replace control
board and failed component.
Stove fails to shut
o.
Stove running in maximum or minimum Turn dial control to O position. See Also, “Feed
Motor Does Not Shut O”.
The Stove should go into a shutdown.
Large, lazy ame,
orange color.
Black ash on
glass.
Dirty Stove.
Poor fuel quality, high ash content.
Incorrect air-fuel adjustment
Excessive feeding/Feed Motor locked on
Clean Stove, including re pot and venting system.
Clean exhaust path. Try a dierent brand of pel-
lets.
Turn fuel adjustment trim dial to COUNTER-
CLOCKWISE to increase combustion air speed;
see trim pot adjustment section.
Follow corrective action for feed motor does not
turn o symptom.
Excessive fuel
spilling over the
re pot into the
ash wells and/or
excessive ame
Excessive feeding/Feed Motor locked on Follow corrective action for feed motor does not
turn o.
Loading ...
Loading ...
Loading ...