Loading ...
Loading ...
Loading ...
PelPro Pellet Stove • 7103-171E • January 9, 2020
pelprostoves.com
25
Replacement Parts
Replacement Parts
Replacement Parts
Replacement part for your Stove
Visit pelprostoves.com
1
Zone
1
Zone
2
Zone
2
Zone
3
Zone
3
Zone
1
Zone
1
Zone
2
Zone
2
Zone
3
Zone
3
Zone
Glass
1. Open the door from the appliance by lifting door o
of hinge pins and lay on a at surface face down.
2. Using a Phillips head screwdriver, remove the 3
brackets and set aside.
3. Remove old glass and gasket from door.
4. Replace gasket to door and add glass.
5. Re-install the brackets using the same screws.
Glass replacement kit: SRV7081-173
Door assembly replacement kit: SRV7086-021
Baes
1. Turn the dial control to the o position. Make sure
the appliance is cool.
2. Remove the center bae rst by using the handle
at the top of the bae and pull up and then towards
you. The hooks on the bae will slide out of the slots
in the bracket.
3. Remove the left bae and then the right bae by
pulling up and then towards you. The left and right
baes have similar hooks and slots as the center
bae.
Replacement kit: SRV7079-006
Zone 1 - Front of Stove
Zone 2 - Firebox
WARNING!
Glass is 5mm thick high temperature heat resistant ceramic glass.
• DO NOT REPLACE with any other material
• Alternate material may shatter and cause injury
Loading ...
Loading ...
Loading ...