Loading ...
Loading ...
Loading ...
4
WWW.VINOTEMP.COM
!
!
SAFETY AND WARNINGS
Before you start
• Make sure that the anti-tip of the range has been properly installed.
• Find the model and serial numbers on the CSA label in the bottom right-hand
corner of the backboard. Note these numbers down for future reference in the
space provided in section ‘Warranty and service’.
• Read this guide, taking special note of the ‘Safety and warnings’ section.
• Remove all the packaging from the oven(s) and cooktop. Recycle items that you
can. If any adhesive residue is left on surfaces, remove this using dish washing
liquid on a soft cloth. Do not use any harsh or abrasive cleaners.
• Make sure you follow the instructions under ‘First use’ before using your range
for cooking.
• To reduce the risk of fire, electrical shock, injury to persons, or damage when
using the appliance, follow the important safety instructions listed below:
SAFETY SYMBOLS
Symbol
Definition
This will alert you to potential personal or property safety hazards. Obey
all safety rules to avoid any property damage, personal injury or death
WARNING indicates a potentially hazardous situation, which, if not
avoided, could result in serious injury or death
CAUTION indicates a moderate hazardous situation, which, if not
avoided, could result in minor or moderate injury
CAUTION – when used without the safety alert symbol, indicates a
potentially hazardous situation, which, if not avoided, could result in
property damage
IMPORTANT used for installation, operation and maintenance
information that are not related to safety.
ELECTRICAL SHOCK HAZARD
• Before removing a faulty oven light bulb, make sure you turn OFF the power
to the range at the main fuse or circuit breaker panel. If you don’t know how
to do this, contact an electrician.
• Do not remove the kick panel or the back panel. Due to electrical wires
behind it, both panels should only be removed by a qualified technician.
• This appliance is equipped with a three-prong grounding plug for your
protection against shock hazard and should be plugged directly into a
properly grounded power outlet. Do not under any circumstances cut or
remove the grounding prong from this plug.
Failure to follow this advice may result in death or electrical shock.
Loading ...
Loading ...
Loading ...