Loading ...
Loading ...
Loading ...
Your new tractor has been assembled at the factorywith exception of those parts left
unassembled for shippingpurposes. To ensure safe and proper operation of your
tractor all parts and hardware you assemble must be tightened securely. Use the
correct tools as necessary to insure proper tightness.
TOOLS REQUIRED FOR
ASSEMBLY
A socket wrench set will make assembly
easier, Standard wrench sizes you need
are listed below.
(1) 9/16"wrench (1) Pliers
(1) 1/2"wrench (1) Utility knife
(1) 3/4" socket with
driveratchet
(1) Tire pressure gauge
6. Secure steedng wheel to steering
shaft with hex belt, lock washer and
large flat washer previously removed.
Tighten securely.
7. Snap steedng wheel insert intocenter
of steedng wheel,
8, Remove protective materials from
tractor hood and grill.
IMPORTANT: Check for and remove any
staples in skidthat may puncturetires
where tractor is toroll off skid.
When dght or left hand is mentioned in
this manual, it means, from your pointof
view,when you are in the operating
position (seated behind the steedng
wheel).
TO REMOVETRACTOR FROM
CARTON
UNPACK CARTON
1, Remove all accessible loose parts
and parts cartons from carton.
2. Cut,from top tobottom, along lines on
allfour comers of carton, and lay
panels fiat.
3. Remove mower and packing mated-
als.
4. Check for any additional loose parts
or cartons and remove.
BEFORE REMOVING TRACTOR
FROM SKID
ATTACH STEERING WHEEL
1. Remove hex bolt, lock washer and
large fiat washer from steedng shaft.
2. Positionfront wheels of the tractorso
they are pointing straight forward.
3. Slide the steedng sleeve over the
steedng shaft.
4. Align tabs and press steedng sleeve
extension intobottom of steering
wheel.
5. Positionsteedng wheel so cross bars
are horizontal (left to dght) and slide
onto steering wheel adapter.
Steering
__ WheelInsert
_Hex Bolt
___ LockWasher
S . (_ LargeFiat
teenng _
_/ Steering
Wheel
Steering _ Adapter
Sleeve _ _--_ Tabs
Extension
SteedngShatt ,,_'_",=_-,_.,
" .i I_ • Ill
Steering _ - i _
9
Loading ...
Loading ...
Loading ...