PRX ONE User’s Guide

Loading ...

ii. “Reset” will set the Delay processing settings to default settings.

iii. “Presets” offers a quick selection of common settings for fast selection in typical use cases. These

delay settings are named as descriptions of the types of common musical uses they simulate. Presets

can assist new users wanting to try quick examples of often-used delay setting combinations. The

user can select “Custom” and adjust all the settings themselves. Or they can start with one of the

location description presets, listen, and then adjust any settings desired. When a user has selected

a preset and then adjusts a setting, all current delay settings are loaded into the Custom preset for

further editing.

. Custom

. Simple Quarters

. Simple Eights

. Simple Triples

. Simple 1:1

. Staggered Echo

. Bounce wall

. Fast Spring

iv. “Beats Per Minute” enters the beats per minute tempo of the song planned or in progress. The

speaker automatically calculates the delay times to match the beats per minute song tempo.

v. “SubDivision” enables the user to enter the number of times the delay returns the signal per beat. For

example, if this is set to “1:2” then for every beat there are two delay returns heard.

vi. “Delay Length” is the setting showing how long, represented in milliseconds (ms), the delays will

continue returning for each beat. The smaller the number, the faster the delay returned signal will fade

out per beat.

vii. “Feedback” is the amount of the delayed signal that is fed back into the Delay processor input, to

give more depth to the delay sounds.

viii. “Low Pass Filter” can be set to reduce the relative level of high frequencies of the delay returned

signal. If the user perceives bright high-frequency harshness resulting from very bright source signals,

this setting can be lowered to compensate.

ix. “Level to Mix” sets the amount of nal delay signal that contributes to the FX Return fader.

. To adjust any parameter, navigate to the parameter using the MASTER/MENU knob. Press the

MASTER/MENU knob to access.

. Adjust the values by turning the knob CLOCKWISE or COUNTER-CLOCKWISE.

. Press the MASTER/MENU knob to accept these changes. Press the BACK button to

cancel these changes.

d. Chorus - The FX Processing Chorus is designed to add a musically oriented light shimmer on rock or

ballad vocals and acoustic guitars. Chorus is often used very lightly to enhance the harmonic content and

character, to bring out more shine on pure wave types of natural musical sources.

Loading ...

User’s Guide - Page 21