Barnes BT50 134678 Model Transfer Pump, 1/5 hp, 120V, 1 Phase, 3/4" GHT Vertical Discharge, 120' Head, Manual

INSTALLATION MANUAL

For BT50. Series: BT50

PDF File Manual, 4 pages, Read Online | Download pdf file

BT50 photo
RETURNED GOODS
RETURN OF MERCHANDISE REQUIRES A “RETURNED GOODS AUTHORIZATION”.
CONTACT YOUR LOCAL CRANE PUMPS & SYSTEMS, INC. DISTRIBUTOR.
Products Returned Must Be Cleaned, Sanitized,
Or Decontaminated As Necessary Prior To Shipment,
To Insure That Employees Will Not Be Exposed To Health
Hazards In Handling Said Material. All Applicable Laws
And Regulations Shall Apply.
IMPORTANT!
WARRANTY REGISTRATION
Your product is covered by the enclosed Warranty.
To complete the Warranty Registration Form go to:
http://www.cranepumps.com/ProductRegistration/
If you have a claim under the provision of the warranty, contact your local
Crane Pumps & Systems, Inc. Distributor.
Limited 24 Month Warranty
Crane Pumps & Systems warrants that products of our manufacture will be free of defects in material and workmanship under normal
use and service for twenty-four (24) months after manufacture date, when installed and maintained in accordance with our instructions.
This warranty gives you speci c legal rights, and there may also be other rights which vary from state to state. In the event the product
is covered by the Federal Consumer Product Warranties Law (1) the duration of any implied warranties associated with the product by
virtue of said law is limited to the same duration as stated herein, (2) this warranty is a LIMITED WARRANTY, and (3) no claims of any
nature whatsoever shall be made against us, until the ultimate consumer, his successor, or assigns, noti es us in writing of the defect,
and delivers the product and/or defective part(s) freight prepaid to our factory or nearest authorized service station. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply. THE SOLE AND EXCLUSIVE REMEDY
FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO ANY PRODUCT SHALL BE TO REPLACE OR REPAIR AT
OUR ELECTION, F.O.B. POINT OF MANUFACTURE OR AUTHORIZED REPAIR STATION, SUCH PRODUCTS AND/OR PARTS
AS PROVEN DEFECTIVE. THERE SHALL BE NO FURTHER LIABILITY, WHETHER BASED ON WARRANTY, NEGLIGENCE OR
OTHERWISE. Unless expressly stated otherwise, guarantees in the nature of performance speci cations furnished in addition to the
foregoing material and workmanship warranties on a product manufactured by us, if any, are subject to laboratory tests corrected for
eld performance. Any additional guarantees, in the nature of performance speci cations must be in writing and such writing must
be signed by our authorized representative. Due to inaccuracies in eld testing if a con ict arises between the results of eld testing
conducted by or for user, and laboratory tests corrected for eld performance, the latter shall control. RECOMMENDATIONS FOR
SPECIAL APPLICATIONS OR THOSE RESULTING FROM SYSTEMS ANALYSES AND EVALUATIONS WE CONDUCT WILL BE
BASED ON OUR BEST AVAILABLE EXPERIENCE AND PUBLISHED INDUSTRY INFORMATION. SUCH RECOMMENDATIONS
DO NOT CONSTITUTE A WARRANTY OF SATISFACTORY PERFORMANCE AND NO SUCH WARRANTY IS GIVEN.
This warranty shall not apply when damage is caused by (a) improper installation, (b) improper voltage (c) lightning (d) excessive sand
or other abrasive material (e) scale or corrosion build-up due to excessive chemical content. Any modi cation of the original equipment
will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective
parts. Neither will we accept charges incurred by others without our prior written approval.
This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our
speci c recommendations. The purchaser is responsible for communication of all necessary information regarding the application and
use of the product. UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT LIMITED TO TRAVEL EXPENSES, RENTED EQUIPMENT, OUTSIDE CONTRACTOR FEES,
UNAUTHORIZED REPAIR SHOP EXPENSES, LOST PROFITS, LOST INCOME, LABOR CHARGES, DELAYS IN PRODUCTION,
IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR
DAMAGE OR DELAYS IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED
WARRANTY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our
prior written approval.
A Crane Co. Company
BARNES
®
INSTALLATION MANUAL
Portable Utility Pump
IMPORTANT! Read all instructions in this manual before operating pump.
As a result of Crane Pumps & Systems, Inc., constant product improvement program,
product changes may occur. As such Crane Pumps & Systems reserves the right to
change product without prior written notifi cation.
420 Third Street 83 West Drive, Brampton
Piqua, Ohio 45356 Ontario, Canada L6T 2J6
Phone: (937) 778-8947 Phone: (905) 457-6223
Fax: (937) 773-7157 Fax: (905) 457-2650
www.cranepumps.com
Form No. 134678A-Rev. A
Series: BT50
115 Volts, 1 Phase, 60 Hz
Specifi cations
Model No. BT50
Part No. 134678
Output
0.50 HP
375 W
Discharge .75 inch
Rated Head 64.3’
Rated Flow 10 GPM
Max. Head 111.5’
Max. Flow 74 GPM
Dimension
(L x W x H)
9.5” x 5.25” x
7.25”
Weight 10lbs.
Loading ...
Loading ...
Loading ...

Other documents for Barnes BT50

The following documents are available:
User Manual Photos

Specifications

See other models: BT12 126922 126921 126916 126915