Loading ...
Loading ...
Loading ...
9
98143 US 3.5 - 01/2019 www.santos.fr
GB
ELECTRICAL CONNECTION:
• The electric power supply for the machine is available in 3 single-phase voltages:
- 110-120 V 50/60 Hz
- 220-240 V 50 Hz
- 220-240 V 60 Hz
Line protection: the machine should be connected to a standard 2-pole + earth
electric socket. The installation should be
fitted with an RCD and a fuse rated at 16A. The appliance must be earthed.
CARE:
• Before connecting the machine, check that the mains electrical voltage is the same as the voltage
for your appliance. Its value is shown:
➢ either on the identification plate under the machine.
➢ or on the identification plate on the last page of this manual.
• If the power cable is damaged, it should be replaced by a special unit available from SANTOS or from approved
SANTOS dealers.
C
ARE: Check that the On / Off switch is in the 0 position before connecting the power cable
plug to your mains electric power socket.
RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE
This equipment is marked with the selective sorting symbol relating to wastes from electrical and
electronic equipment. It signifies that this product should be taken over by a selective collection system
conforming to the Guideline 2012/19/EU (WEEE) - part Professional Equipment - so that it can be
either recycled or dismantled in order to reduce any impact on the environment.
For more information, please contact your Retailer or the SANTOS.
F
or eliminating or recycling components of equipment, please contact a specialized company or contact SANTOS.
The electronic products not undergoing a selective sorting are potentially dangerous for the environment.
The damaging materials should be eliminated or recycled according to the regulations in force.
• Coffee grinder N° 43 is for shops and coffee roasters wanting to obtain 250 g to 1 kg of freshly ground coffee.
•
Coffee grinder N° 43 enables ground coffee to be dispensed in bags of 250 g, 500 g and 1 kg.
• The appliance has an aluminium cast base and a housing in 18/10 stainless steel plate serving as a support to the
grinding unit and the hopper.
• The hopper is made of very resistant polycarbonate and has a capacity of 1.7 kg, it is fitted with a hinged lid.
•
A knob to select the fineness of grinding allows all types of coffee grinding (finely ground coffee, espresso, filter,
medium or course).
• The grinding discs in fully-hardened special steel (63.5 mm diameter) guarantee long-lasting consistency in the quality
of grinding. They are easily dismantled when worn out.
SWITCHING ON AND OFF :
The coffee grinder is switched on and off by a luminous clad switch, ref. (9), located on the upper face of the housing.
SELECTING GRINDING :
• A selection knob, ref. (6), enables the user to obtain the desired fineness of grinding, by bringing the grinding discs
closer together.
• To obtain finer grinding turn the selection knob ref. (6) in anti-clockwise direction.
To obtain coarser grinding turn the knob in clockwise direction. A set pointer ref. (4) enables you to locate on a graded
scale ref. (7), the setting position desired. This setting c
an be reset after each change of grinding discs using the set
pointer (4) and the locking screw ref. (15).
If the grinding discs are to be changed, see the paragraph on "Servicing".
COFFEE GRINDER N° 43
USING THE MACHINE
SAN 57062-G Santos Manuel N43 (98143).qxp_- 16/01/2019 15:12 Page9
Loading ...
Loading ...
Loading ...