Loading ...
Loading ...
Loading ...
- 30 -
9.Please run gas exhaust outdoors to prevent re.
10.Please do not exhaust the waste gas into the
wall, attic or garage.
11.The waste gas from the range hood should not
be exhausted into the hot smoke pipe that is
used to exhaust smoke generated from burning
gas or other fuel.
12.Please keep the machine horizontal from left to
right.
13.After installation, confirm the range hood is
qualied by running a test in which no abnormal
phenomena occur.
Please read the manual carefully and keep the
manual for future reference.
Installation Position
This range hood can only be installed in the
kitchen; please do not use it in other places.
This range hood can only be installed above the
stove, installation position is shown in the gure.
The room temperature should not exceed 40°C.
The installation wall should be of an incombustible
substance; installing the machine on wooden
material or other combustible material is
prohibited.
Calculation before installation
Please refer to the figure below for accurate
calculation before installation.
Installation Diagram of the Range Hood
Hole dimension of the upper cabinet or suspended
ceiling:
Hole dimension of the upper
cabinet or suspended ceiling:
35 7/16"(900mm)
14 1/2''
(368mm)
5 3/8"
(135mm)
R4 9/16"
(R115mm)
Outlet pipe
suspended
ceilingtrim cover
5 3/8"
(135mm)
(650-700mm)
31 1/2"-33 1/2"
(800-850mm)
★27"-38 5/8"
(685-980mm)
35 7/16"(900mm)
27"(685mm)
15 9/16"
(395mm)
20 5/16"
(515mm)
15 3/4"
(400mm)
Figure 2 Cabinet Match Diagram
(650-700mm)
Outlet pipe
suspended
ceilingtrim cover
2 3/16"
(54mm)
7 3/8"
(186mm)
2 3/16"
(54mm)
21 5/8''
(548.5mm)
trim cover hook
13/16"
(20mm)
10 1/16"
(255mm)
Figure 3 Installation Diagram
25 5/8"-27 9/16"
25 5/8"-27 9/16"
Loading ...
Loading ...
Loading ...