Loading ...
Loading ...
Loading ...
14
Figure 33
Figure 33a
Rotate the top of the coupler coun-
ter clockwise to extend the coupler
to the to the "OFF"position.
Coupler
extended
9. Hooking up the keg coupler to the keg: Verify the cou-
pler is in the "OFF" position (see Figure 33a).Align the
lugs on the keg with the corresponding openings on the
keg coupler and turn clockwise until the coupler stops
(about 90°). Push down and twist the top of the coupler
clockwise to allow gas to enter the keg.
Figure 32
The chain is fastened and taped to the
top of the interior liner. Remove the tape
and secure the CO2 tank in place in the
back right corner. Loop chain around top
of tank and connect with "S" hook.
Push faucet handle back toward
tower to close the faucet
Figure 32a
Connect
with "S"
hook
USING YOUR BEER DISPENSER
Lugs
on keg
Figure 33b
Loading ...
Loading ...
Loading ...