Loading ...
Loading ...
Loading ...
10
Operating Instructions
Setting the Timer to turn one or more Cooking Zones Off
Touch the “+” or “-“ control of the cooking zone you wish to set the timer
for.
Set the timer as described on the previous page.
A red dot next to the power level for the corresponding cooking zone will
illuminate to indicate that the timer has been set for it.
When the timer has elapsed the corresponding cooking zone will switch off
automatically. The cooking zone display will show “H” which means that it is
still hot.
Note: If you wish to change the timer once it has been set, you need to start from the beginning.
Multiple Timers
If more than one cooking zone is using the automatic timer function, the timer display will show the shortest time
remaining. The red dot n next to the power indicator will flash to show to currently displayed timer.
When the shortest timer has elapsed, the corresponding the display will show the next shortest time.
Over-Temperature Protection
This cooktop is equipped with a temperature sensor which can detect when the cooktop is at an excessive heat. If
this happens, the sensor will automatically switch off a cooking zone.
Residual Heat Warning
When a cooking zone is switched off but still hot, its display will show “H” to indicate that it is still hot.
Default Working Times
If you forget to turn off a cooking zone, there is an automatic shut off safety feature that will automatically turn the
cooking zone off after a period. See the table below for the working times.
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
Loading ...
Loading ...
Loading ...