Loading ...
Loading ...
Loading ...
8
Operating Instructions
Using the Cooktop
When the power is connected you will hear a beep and all the lights will come on for one second and then go out.
This indicates that the cooktop has entered standby mode.
Turn the cooktop on by touching the On / Off control. All
indicators will show “-“.
Place a suitable pan on the cooking zone that you wish to use.
Make sure that the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control
Touching the control B for boost function, the indicator will show
“P” for selected zone. To cancel boost function, touch control B or
touch“-“.
Select a heat setting by touching the “+” or “-” control. You can
modify the heat setting at any time during cooking. By holding
down either of these controls, the value will adjust up or down.
Note: If you don’t choose a heat setting within one minute, the
cooktop will automatically switch off.
Turn the cooking zone off by scrolling down to “0” or touching the
“+” and “-” buttons together.
Turn the whole cooktop off by touching the On/Off button.
Beware of hot surfaces
“H” will indicate which cooking zone is hot to touch. It will disappear when the surface has
cooled down to a safe temperature.
Loading ...
Loading ...
Loading ...