Loading ...
Loading ...
Loading ...
36
OPERATION
NOTE
• Use the manufacturer’s recommendations on
the detergent or fabric softener package when
setting the
ezDispense
amounts for a standard
4-6 kg
load.
• Most cycles will automatically use the default
amounts you have set, indicated by the Normal
LED light on the
Dispenser 1
and
Dispenser 2
buttons.
• The
Delicates
,
Hand/Wool
,
Sportswear
, and
Tub Clean
cycles turn the
ezDispense
function
off by default.
Changing Default Dispense
Amounts
The default settings are configured to dispense
42
ml
of detergent and
30 ml
of softener for
4-6 kg
of
normally soiled laundry.
Detergent should be used according to the
instruction of the detergent manufacturer and
selected according to type, colour, soiling of the
fabric and the washing temperature.
1
Press the
Power
button.
2
Change default dispense amounts.
•
Dispenser 1
: Press and hold the
Dispenser 1
button for 3 seconds.
•
Dispenser 2
: Press and hold the
Dispenser 2
button for 3 seconds.
3
Turn the knob to increase or decrease the
amount of detergent or fabric softener. The
amount is shown in the display.
• The default amounts can be increased or
decreased in
1 ml
increments, within a range
of
9 ml
to
150 ml
. The amount dispensed
may vary slightly depending on the model.
4
Save the default changes.
•
Dispenser 1
: Press and hold the
Dispenser 1
button for 3 seconds.
•
Dispenser 2
: Press and hold the
Dispenser 2
button for 3 seconds.
Using both Dispensers for Liquid
Detergent
NOTE
• If you set both dispensers for liquid detergent,
you can not use the liquid softener dispenser for
liquid softener.
• If you want to use a liquid softener:
- After the programme is finished, select
Rinse+Spin
(Default programme of Download
Cycle) and add softener directly into the drum
or into the manual main wash detergent
compartment.
- If you downloaded a download cycle,
Rinse+Spin
is not available.
Setting the Dispenser 2 for Same Liquid
Detergent Dispenser
1
Press the
Power
button.
2
Press and hold the
Dispenser 1
and
Dispenser
2
buttons at the same time for 3 seconds.
3
Press the
Dispenser 1
button to light up the
b
Link indicator.
• The
a
Liquid detergent indicator is always
light on.
• When the
b
Link indicator is selected, the
Dispenser 2
button cannot be operated.
4
Press and hold the
Dispenser 1
and
Dispenser
2
buttons at the same time for 3 seconds to
save the changes.
Setting the Dispenser 2 for Different Liquid
Detergent Dispenser
1
Press the
Power
button.
global_main.book.book Page 36 Tuesday, February 8, 2022 2:47 PM
Loading ...
Loading ...
Loading ...