Loading ...
Loading ...
Loading ...
30
Updating the software
You can update the Home Connect software on your
appliance. As soon as a new update is available, —˜š
(update) will appear on the display.
You can install the update directly via the message on
the display or, alternatively, you can do this manually.
1.
Switch the appliance on.
2.
Press and hold Remote Start for at least 3 seconds.
‘ž£ (connect automatically) will appear on the
display.
3.
Turn the program selector to position 6.
—˜š (update) will appear on the display.
Start/Pause will flash if a software update is available.
4.
Press Start/Pause .
¢“à (yes) will appear on the display.
5.
Press Start/Pause to confirm.
Update installation will now start. This process may take
several minutes. Do not switch the appliance off while
updates are being installed.
6.
Press Remote Start briefly to exit the Home Connect
settings.
Information on data protection
When your appliance is connected to a WLAN network
that is connected to the Internet for the first time, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
▯ Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed WiFi communication module).
▯ Security certificate of the WiFi communication module
(to ensure a secure data connection).
▯ The current software and hardware version of your
domestic appliance.
▯ Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note: Home Connect functions can be used only in
conjunction with the Home Connect app. Information on
data protection can be accessed in the Home Connect
app.
Declaration of Conformity
BSH Home Appliances Group hereby declares that the
appliance which features Home Connect functionality is
in accordance with the essential requirements and other
relevant provisions of the following Directives.
Wi-Fi® Module FCC/IC Statements
Model: COM1
FCC ID: 2AHES-COMGEN1
IC: 21152-COMGEN1
The Home Connect module is a communication device
designed to provide communication between appliances
and smart devices.
This module is integrated at the factory, under direct
control of B/S/H Home Appliances Corporation, and is
not user serviceable or upgradable. At least 20cm
separation distance should be maintained from device to
user.
FCC COMPLIANCE STATEMENT
9 CAUTION
Changes or modifications not expressly approved
could void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules.
Operation to the following two conditions:
▯ This device may not cause harmful interference and
▯ this device must accept any interference received,
including interference that may cause undesired
operation.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions:
▯ This device may not cause interference and
▯ this device must accept any interference, including
interference that may cause undesired operation of the
device.
WiFi is a registered trademark of Wi-Fi Alliance.
Loading ...
Loading ...
Loading ...