Loading ...
Loading ...
Loading ...
Connecting the antenna or the cable
Be sure your antenna or other device is connected properly before
pIugging in the AC power cord.
If you connect to an antenna through RF cable
Any DTV programs that are broadcasted in your area can be received
for free through an antenna connection,
If you connect a set-top box through RF cable
If the TV is connected to a cable / satellite set-top box via a coaxial
connection, set the TV to channel 3, 4 or the channet specified by the
service provider.
OUT
RF cable J
IN@
RF cable set-top box
I
If you connect a set-top box through HDMI
If the TV is connected to a cable / satellite set-top box via HDkII, make
sure you select the correct Source by using _ SOURCE.
OUT
set-top box
If you connect a set-top box through Component Video Input
If the TV is connected to a cable / satellite set-top box via Component
Video Input, make sure you select the correct Component Video Source
by using _ SOURCE.
Connecting a set-top box, Blu-ray disc / DVD recorder
via composite connectors and Analog Audio
Do not place your recorder too dose to the screen because some
recorders can be susceptible to signals.
IN
Note
) + Video _cabl_s
OUT AA
Audio (L/R) + _ OUT
Video cables _
OUT IN
Blu-ray disc/DVD recorder
If you have any question about the DIV's antenna, visit www.antennaweb.org for
further information,
• Dependi% on your antenna system_ you may need different types of combhqers
(mixers) or separators (splitters) for HDIV signal, ]he minimum RF bandpass on
these devices is 2,000MHz or 2GHz,
• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable
from the antenna Input jack before moving the unit,
• If you did use an antenna to receive Analog ]_ it should also work for DTV receptiorL
Outdoor or attic antennas will be more effective than a set-top box or inside antenna.
• Io ]urn On your reception source easily between antenna and cable, install an
antenna selector:
• If you are not receiving a signal from your cable service, contact the Cable provider:
• Only the left loudspeaker reproduces sound for mono equipment Use a mono to
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
Plugging in the AC power cord
Hake sure that the AC power cord must be pIugged to an AC outlet
after all the necessary connections are made.
Noso
ch time you plug in the AC power cord, no operations will be performed for a few
conds, This is not a malfunction.
OUT
RF cable [
set-top box
Loading ...
Loading ...
Loading ...