Loading ...
Loading ...
Loading ...
INSTALLING THE ADJUSTABLE LEGS
Glem Gas and Emilia cookers are delivered with adjustable height legs that need to be fitted
prior to the cooker installation. On some models the legs easily screw into the underside of the
cooker. On other models the legs have a new keying system where the screw on the top of the
leg is inserted and then slid up the slot so it can be tightened securely.
See FIG. 1. You may need to hand tighten the screw into the top of the legs first.
TIP:
Measure the height of the benchtop and the cooker itself and then pre adjust the leg height so
when they are installed the cooker will be 10 mm above the height of the bench.
6
TIP:
You can lay the cooker carefully on its back to install the legs. Remove all burner components
before tilting the cooker back - the procedure requires two people. See FIG. 2. Use the outer
carton as a base to protect the cooker and the floor.
When lifting the cooker back up don’t lever the full weight of the cooker on the rear legs, lift the
cooker onto all four legs.
M = bench height + 10mm including legs
FIG. 1.
FIG. 2.
Location of model number
and serial number. On 53cm wide
cookers the label is on the rear panel.
Record the number nto the instruction
book for easy access.
Rotate the bottom part of the legs for final
height and leveling adjustments
Laying the cooker carefully on its back onto the packaging
makes the operation of installing the legs very easy.
M
Loading ...
Loading ...
Loading ...