Loading ...
Loading ...
Loading ...
OPERATION OF THE GAS COOKTOP
Gas Burners
The combination of large burners, wok burners and smaller burners provides the flexibility for
different cooking tasks. All burners are fitted with flame failure safety devices. This means that if
the flame goes out for any reason the gas stops flowing.
To ignite any burners simply depress the corresponding control knob and rotate anti clockwise to
the high flame position. As the knob is rotated the gas begins to flow and the electrode begins
sparking. Once the flame is lit hold the knob for a couple more seconds to activate the flame
failure safety valve.
In case of ignition malfunction or electricity failure a match can be used to ignite the burners.
Strike a match and place it close to the selected burner. Depress the corresponding control knob
and turn it anti clockwise to maximum flame.
General Points
If you have problems lighting the burners check that the round cap on the top of the burner is
correctly aligned.
If the burner is wet the ignition may not operate correctly. In that case light the burner using a
match.
Take care as the electronic sparker is ceramic and can be easily damaged when reassembling the
burner after cleaning.
Cast iron burner cap
Alloy flame spreader
Burner base
Ceramic ignitor (sparker)
Brass injector
Flame failure device
Gas Burner assembly
Sometimes when the burner is difficult to light it is simply due to the burner not being correctly
assembled. All parts must be correctly aligned.
11
Loading ...
Loading ...
Loading ...