Loading ...
Loading ...
Loading ...
Installation Instructions
[] DRYER EXHAUST TO LEFT OR
BOTTOM OF CABINET
_- PROTECT YOUR HANDS
AND ARMS FROM SHARP EDGES
WHEN WORKING INSIDE CABINEZ
REMOVE
SCREW
ANDSAVE,
O_ REMOVE/
DESIRED
KNOCKOUT
(ONEONLY),
Detach and remove the bottom or left side knockout as
desired. Remove the screw inside the dryer exhaust duct
and save. Pu]] the duct out of the dryer. Protect sharp edges
around the knockout and exhaust opening with rope.
FIXINGHOLE
\\
B A
[-_- 9"
Cut the duct as shown and keep portion A.
TAB LOCATION
BEND
TAB45°
Through the rear opening, locate the tab in the middle of
the appliance base. Lift the tab to about 45 ° using a fiat
blade screwdriver.
ADDING NEW DUCT
FIXING
HOLE
PORTION"A"
LEFTSIDE
EXHAUST
Reconnect the cut portion (A) of the duct to the blower
housing. Make sure that the fixing hole is aligned with the
tab in the base. Use the screw saved previously to secure the
duct in place through the tab on the appliance base.
ADDING ELBOW AND DUCT FOR
EXHAUST TO SIDE OF CABINET
" Pre-assemble 4" elbow with 4" duct. Wrap duct rope
around joint.
, Insert duct assembly, elbow first, through the side opening
and connect the elbow to the dryer interna_ duct.
CAUTION: Be sure not to pull or damage the
electrical wires inside the dryer
when inserting the duct.
[_ DUCT
TAPE
/
"Apply duct tape as shown on the joint between the dryer
internal duct and the elbow.
DUCT
CAUTION:
internal duct joints must be
secured with tape, otherwise
they may separate and cause
a safety hazard,
Loading ...