Loading ...
Loading ...
Loading ...
lnstamlation Instructions
[] EXHAUST CONNECTION
G - TO REDUCE THE RISK
OF FIRE OR PERSONAL INJURY:
" This dryer nmst be exhausted to tile outdoors.
" Use oniy metal duct.
/
" Do not terminate exhaust in a chimney, any gas vent,
under an enclosed floor (craw] space), or into an attic.
The accumuh_ted ]int cou]d create a fire hazard.
. Provide an access for inspection and cleaning of the
exhaust system, especiM]y at turns. Inspect and dean at
]east once a year.
° Never terminate the exhaust into a common duct with a
kdtchen exhaust. A combination of lint and grease could
create a fire hazard.
° Do not obstruct incoming or exhausted air.
WE RECOMMEND THAT YOU iNSTALL YOUR DRYER
BEFOREYOUR WASHER. THIS WILL PERMIT DIRECT
ACCESS FOR EASIEREXHAUST CONNECTION
THIS DRYERCOMES READY FORREAREXHAUSTING. IF
SPACEIS LIMITED, USE THE INSTRUCTIONS IN SECTION
12 TO EXHAUST DIRECTLYFROM THE LEFTSIDEOR
BOTTOM OF THE CABINET.
STANDARD REAR EXHAUST
WESTRONGLYRECOMMENDTHEUSEOF
RIGIDMETALEXHAUSTDUCT.IFUSING
FLEXABLEMETALDUCT,CUTITTOTHEPROPER
LENGTHANDAVOIDBUNCHINGOFTHEDUCT
BEHINDTHEDRYER,
5
FORSTRAIGHT
LINEINSTALLATION,
CONNECTTHE ELBOWHIGHLY
DRYEREXHAUST "_ RECOMMENDED,
TOTHEWALLUSING
DUCTTAPE,
ELBOWHIGHLY
RECOMMENDED,-
RECOMMENDED
CONFIGURATION
TOMINIMIZE
EXHAUST
BLOCKAGE,
NOTE: ELBOWS WiLL PREVENT DUCT
KiNKiNG AND COLLAPSING.
[] LEVEUNG DRYER
LEVEL
FRONT-TO-BACK,
,.,..,, LEVEL
SIDE-TO-SIDE,
4LEVELINGLEGS
STANDTHEDRYERUPRIGHTNEARTHE
FINALLOCATIONANDADJUSTTHE4LEVELING
LEGSTOMATCHTHEHEIGHTOFYOURWASHER,
ADJUSTTHE2ANTI-TIPLEGSTOCONTACT
THEFLOOR,
2ANTI-TIPLEGS
Loading ...
Loading ...
Loading ...