Kenmore 79032363416 Elite gas range

User Manual - Page 34

For 79032363416.

PDF File Manual, 40 pages, Download pdf file

Loading ...
Loading ...
Loading ...
34
Care & Cleaning
Removing and Replacing the Drawer
Figure 2
Figure 1
Lever
Lever
Left Glide
Right Glide
Pull up lever
with  nger
Push down
lever with
nger
To Remove the Drawer:
1. Open the drawer to the fully opened position.
2. Locate glide lever on each side of drawer, pull up on the
left glide lever and push down on the right glide lever (See
Figure 1).
3. Pull the drawer away from the range.
To Replace the Drawer:
1.
Pull the plastic slider to the front of the glide slots on
each side of the drawer cavity (See Figure 2).
2. Align the glide on each side of the drawer with the
drawer cavity glide slot.
3. Push the drawer into the drawer cavity until glide levers
click” (approximately 2”). If you do not hear the glide
levers “click” or the drawer does not feel seated
remove the drawer and repeat steps 1 thru 3.
Be sure the range is unplugged and all
parts are COOL before replacing oven light. Wear
a leather-faced glove for protection against possible
broken glass or burns.
To replace the light bulb:
Replacing the Round Halogen Oven Light:
1. Turn the power o at the main source or unplug the
appliance.
2. The bulb is covered with a glass shield screwed in
place (g. 3). Replace bulb with 25-watt halogen
appliance bulb only (g. 4). Please note: do not allow
your ngers to touch the new bulb when replacing.
This will shorten the life of the new bulb. Use a
paper towel to cover the new bulb when installing.
3. Replace the glass shield (g.3). The glass shield must
be in place whenever the oven is in use.
4. Turn power back on again at the main source (or plug
the appliance back in).
5. The clock will then need to be reset.
Figure 3 - Glass shield
removal
Figure 4 - Pull bulb out.
Replacing the Halogen Oven Light
The oven lights will automatically turn ON when the oven
door is opened. The oven lights may also be manually
operated by pressing the
pad.
The oven light bulb is covered with a glass shield. The
glass shield can be removed to be cleaned manually or to
change oven light. THIS GLASS SHIELD MUST BE IN PLACE
WHENEVER THE OVEN IS IN USE.
Loading ...
Loading ...
Loading ...