Kenmore 79032363416 Elite gas range

User Manual - Page 10

For 79032363416.

PDF File Manual, 40 pages, Download pdf file

Loading ...
Loading ...
Loading ...
10
Before Setting Surface Controls
Burner Cap
Burner Head
Fig. 1
Fig. 4
Correct Burner Cap
Placement
Fig. 2
Incorrect Burner Cap
Placement
Fig. 3
Burner Cap Lip
Check Burner Cap Placement Before Operating
the Surface Burners
To prevent  are-ups and avoid creation of harmful by-
products,
do not use the cooktop without all burner caps
properly installed to insure proper ignition and gas ame size.
It is very important
to be sure that all surface burner caps
and burner grates are properly installed and in the correct
locations
BEFORE operating the cooktop burners.
Remember:
Always keep surface burner caps in place whenever using
a surface burner.
When placing the burner caps, be sure that all burner caps
are seated  rmly and rest level on top of burner heads.
For proper  ow of gas and ignition of burners
DO NOT
allow spills, food, cleaning agents or any other material
to enter the gas ori ce port opening.
Round Style Burners
The burner cap lip (See Fig. 1) should  t snug into the center
of burner head and rest level. Refer to Figs. 2 & 3 for
correct and incorrect burner cap placement. Once in place,
you may check the  t by gently sliding the burner cap
from side to side (Fig. 4) to be sure it is centered and  rmly
seated. When the burner cap lip makes contact inside the
center of the burner head you will be able to feel it. Please
note that the burner cap should NOT move o the center of
the burner head when sliding from side to side.
Burner Caps
Fig. 5
Fig. 6
Recessed area
Burner Head
Double Ring Style Burners
The Double Ring burner only operates properly with two
burner caps in place. Be sure the burner cap lips are
positioned facing down towards the burner head (Fig. 5)
and into the recessed areas (Fig. 6) on each side of the
burner head. Be sure both burner caps are seated  rmly and
rest level on the burner head before operating.
Check the  t for each cap using the same method for the
round burner caps by gently sliding each cap from side to
side. Please note that the burner cap lips should NOT move
out of recessed areas of the burner head.
Loading ...
Loading ...
Loading ...