Loading ...
Loading ...
Loading ...
EN
49
Extended menu
www.bora.com
8.2.3 Menu item E: Display and button test
INFO The display and button test checks that all LEDs
in the operating panel are working.
Fig. 8.4 Menu item E: Display and button test
Activating the display and button test:
Tap the slider zone
All touch control and display areas of the operating
panel are shown at 50% brightness.
The power button, the navigation arrows and the menu
button are not included in the test (100% brightness).
Test options:
Tap a button
The symbol flashes at 100% brightness.
Swipe
The slider flashes at 100% brightness. The cooking zone
indicators and the multi-function display change their
values depending on the slider position.
Tap on a cooking zone
All indicators in the cooking zone flash at 100%
brightness.
Tap an additional cooking function
All additional cooking function symbols in the
corresponding cooking zone flash at 100% brightness.
Tap /
The corresponding button flashes red, then green, then
blue, once for each colour.
Tap / / / /
The corresponding button flashes 3x.
8.2.4 Menu point F: Reset to factory
settings
Fig. 8.5 Menu item D: Activate the demo mode
Resetting to factory settings:
Tap the slider zone
The system and all settings are reset to the basic
factory settings.
8.3 Gas configuration menu
INFO The burner nozzles, gas type, gas pressure and
gas characteristic curve may only be changed by
a certified engineer or BORA service technician.
He/she also assumes responsibility for the proper
gas installation and commissioning.
INFO Correct settings are important for the safe,
problem-free operation of the gas cooktop.
INFO You can find exact instructions on using the menu
in the Menu chapter.
Loading ...
Loading ...
Loading ...