Loading ...
Loading ...
Loading ...
EN
34
Operation
www.bora.com
6.3.7 Short-time timer (egg timer)
Activating the egg timer
Tap the egg timer button
The time appears in the 7-segment display above the
sliders in hours, minutes and seconds (
0
:
0
0
:
0
0
).
The system changes to colour mode “beige”.
The cooking zones in the display are dimmed.
Setting the time
See 6.5.9 Cooking zone timer
Start egg timer
Tap the start button
An acoustic signal can be heard and the set value is
confirmed.
The set time starts to count down.
The operating panel display changes to the standard
display.
The remaining time is shown by the system exact to the
second.
10 seconds before the time runs out, the remaining
time and egg timer button start to flash.
Time lapsed
When the set time has lapsed an acoustic signal is
heard (max. 60 seconds).
The time display and egg timer button flash (max. 60
seconds).
The remaining time is counted down for another 60
seconds maximum (
,
0
:
0
0
:
0
1
...)
INFO You can stop the acoustic signal and flashing
display by tapping the egg timer button.
Deactivating the egg timer early
Long press on the egg timer button
The egg timer function is ended.
The operating panel display changes to the standard
display.
6.4 Operating the cooktop extractor
INFO To be able to operate the cooktop extractor, fan
operation must be active in the operating panel
(colour mode “blue”).
The slider and the fan symbol light up blue in the standard
display.
6.4.1 Setting the fan power level
The fan power levels can be adjusted in different ways:
tap on or
adjustment using the slider
by tapping a certain position on the slider
long press on or (adjustment in twos)
6.3.4 Control lock
Activating the control lock
Long press on the lock button
The operating panel display is dimmed.
The lock button lights up.
All functions except for the power button and lock
button are locked.
INFO If the system is switched off when the control lock
is active, the control lock will no longer be active
next time the system is switched on.
Deactivating the control lock
Long press on the lock button (3 sec.)
The operating panel display lights up and the operating
panel is active again.
The lock button is dimmed.
6.3.5 Cleaning lock (wipe function)
Activating the cleaning lock
Tap the cleaning button
The operating panel display is dimmed.
The cleaning button lights up.
The operating panel is locked.
All settings stay the same.
The countdown starts in the multi-function display.
Time lapsed
After the end of the time set, the operating panel is
automatically unlocked.
INFO If the system detects that the operating panel
has been covered for a prolonged period (> 8
sec.) when the cleaning lock is active, after
deactivating the cleaning lock all active cooking
zones are automatically paused.
6.3.6 Childproofing feature
The lock symbol lights up in the operating panel
display.
Permanently activating the childproofing feature
see the Menu chapter, menu item 2: Childproofing feature
Deactivating the childproofing feature for a cooking
session
Long press on the lock button (3 sec.)
The operating panel display lights up and the operating
panel is active again.
The lock button is dimmed.
Loading ...
Loading ...
Loading ...