Loading ...
Loading ...
Loading ...
ABOUT SURFACE COOKING
CAUTION
BEFORE COOKING
,, Do not use the glass cooktoD surface as a cutung board.
Do not olace or stere items that can melt or catch fire on the g_assCOOKtOD.even
when _t s not be ng used.
Turn the surface units on only after placing the ceoKware on them
Do net store heaw items above the ceokteo surface. They could fall and damage it.
CAUTION
DURING COOKING
Do not place aluminum foil or plastic items such as salt ana pepper snaKers, spoon
no_aers, or plastic wrappings on the range when _t_s_nuse. The hot air from the vent
could melt plastics or _gniteflammable items.
Make sure the correct s drface unit is turned on.
D Never cook d_rectly on the glass. Always use COOKware.
Always place tne Dan _nthe center of the surface unit you are COOKingon.
Never leave surface units unattenaea wme rising a n gh heat setting. Beilevers cause
smoKing and greasy spulovers that _naj catch on fire.
Turn the surface units off before removing coeKware.
Do net use plastic wrap to cover food. Plastic may melt onto the surface and be very
difficult to remove.
/k
CAUTION
AFTER COOKING
Do not touch the surface units until they nave cooled down.
The surface ma / De stJ be hot and ourns may occur if the c ass surface is teucneo
before it nas COOleddown sufficient'y.
Immediately c ean sDu_son the COOKng area to prevent a tough c_ean_ngchore ater.
If cabinet storage is prowded d_rect_yabove the cooking surface, make sure that tne
items are infreuuently usea ana can be safely stored in an area sup ected to heat.
Temperatures may be unsafe for items such as volatile lie JIQS.cleaners or aerosol
sprays.
About the radiant surface elements
The temperature rises gradually and evenly. As the temperature rises, the radiant element will glow
red. To maintain the selected setting, the element will cycle on and off. The heating element retains
enough heat to provide a uniform and consistent heat during the off cycle. For efficient cooking,
turn off the element several minutes before cooking is complete. This will allow residual heat to
complete the cooking process.
®
Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI
setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting is
normal and can occur if the cookware is too small for the radiant element or if the cookware
bottom is net flat.
17 Surface cookng
NE595ROABSR_AA_DG68-00433A-06_EN.indd 17 06/03/2015 14:30:12
Loading ...
Loading ...
Loading ...