Loading ...
Loading ...
Loading ...
Installation Instructions
[] LEVEL THE RANGE
rA] Install the oven shelves in the oven and
position the range where it will be installed.
J m _ Lower
Leg _ range
IevellrRoo__
Raise
range Lower
range
(on some models) (on some models)
FB] Check for levelness bg placing a spirit level
or a cup, partiallg filled with water, on one of
the oven shelves. If using a spirit level, take
two readings-with the level placed diagonallg
first in one direction and then the other.
r-_ Remove the broiler drawer or kick panel.
See the Care and cleaning of the range section.
The front leveling legs can be adjusted from
the bottom and the rear legs can be adjusted
from the top or the bottom.
r-_ use an open-end or adjustable wrench to
adjust the leveling legs until the range is level.
r_ After the range is level, slide the range awag
from the wall so that the Anti-Tip device can
be installed.
[] INSTALL THE ANTI-TIP DEVICE
WARNING -
• If the Anti-Tip Device supplied with the range
does not fit this application, use the Anti-Tip
Device WB02kl0020.
Range must be secured with an approved
Anti-Tip device.
Unless properlg installed, the range could be
tipped bg gou or a child standing, sitting or
leaning on an open door.
After installing the Anti-Tip device, verifg that
it is in place bg carefullg attempting to tilt the
range forward.
This range has been designed to meet all
recognized industrg tip standards for all
normal conditions.
• The use of this device does not preclude
tipping of the range when not properlg
installed.
[] Mark the wall where the RIGHT EDGE
of the range is to be located. Be sure
to allow for the countertop overhang
if gou intend to install the range next
to cabinets.
Slotted head
screw
Approx. 20'
Anti-Tip I
device I
I
WallplateI
!
edge
of range
J
E_] Locate the outside edge of the device 2V8"
toward the center of the range from the
marked edge of the range.
r-_ using the device as a template, mark the
position of the hole for the screw.
41
Loading ...
Loading ...
Loading ...