Loading ...
Loading ...
Loading ...
12
OPERATING INSTRUCTIONS (CONTINUED)
Using the Manual and Remote Controls
Using the Power Button
Using the Flame Control Button
On the top-right side of the electric replace (A) is the control panel. The buttons on the front of the
electric replace (A) and the remote control (B) function in the same way. The remote control has an
effective range of up to 13 ft.
• The main power button (1) is located on the
control panel on the front of the electric replace.
• Pressing the power button (1) once turns the
power on.
• Pressing the power button (1) again will turn the
power off.
• If you nd that none of the other buttons appear
to work, check to make sure that the main power
(1) is turned on.
• Press the ame control button (2)
to turn on the ember bed and
ame effect.
• Pressing the ame control button (2)
once turns ames on and lights the
ember bed.
• Pressing the ame control button
(2) again will cycle through different
colors of the ember bed. The color
rotation mode will cycle through
different color settings continuously.
Reference the table for more
detailed information.
Check that the heater outlet grill is not covered or obstructed in any way, and make sure the power
to the unit is switched on. The replace can be accessed in two ways: Using the touchpad control
panel, or using the multifunction remote control unit.
Press the appropriate button to operate your replace:
1. Power Button
2. Flame Control Button
3. Heater Control Button
4. Timer Control Button
5. Digital Display Panel
JY-3B
JY-3B
1
2
4
1
3
5
2
4
3
The plastic tab inside the battery
compartment MUST be removed
before the remote control will operate.
(Pull Tab)
Button Press Display Value
Ember Bed and
Flame Color
1st Press 1 Orange
2nd Press 2 Green
3rd Press 3 Blue
4th Press 4 Orange/Green
5th Press 5 Orange/Blue
6th Press 6 Orange/Green/Blue
7th Press 7 Cycle
Loading ...
Loading ...
Loading ...