Chamberlain KLIK5U-BK2

The remote control will not program to a product with DIP switches.

•฀Checkthebatteryintheremotecontrol.TheLEDshouldlightwhenyoupressabutton.Replacethebatteryifnecessary.

•฀Ifprogrammingwith2positionDIPswitches,reversetheDIPswitches(OFFtoONandONtoOFF),thenrepeattheprogramming

steps.

•฀ForChamberlainremotecontrolsDONOTusethe“0”position,use“+”or“-”.Ifyoualreadyhavea3-buttonremote,DIPswitch#1

mustbesetto“-”ifthelargebuttonistoopenthedoor.Itmaybenecessarytoreprogramoriginalremotecontrols.

•฀RepeattheprogrammingstepsbutmakesuretheLEDstopsflashingbetweeneachpressoftheremotecontrolbutton.

•฀TryprogrammingusingtheAlternativeProgrammingOptionforproductswithaLEARNbutton.

The remote control will not program to a product with a Program/LEARN button.

•Checkthebatteryintheremotecontrol.TheLEDshouldlightwhenyoupressabutton.Replacethebatteryifnecessary.