Loading ...
Loading ...
Loading ...
LUBRICATION
The saw motor bearings have been packed at the factory
with proper lubricant and require no additional lubrication•
The following parts should be oiled occasionally with SAE
No. 20 or No. 30 engine oil.
1. Tilt screw threads and pivot nut. (First Clean with
Craftsman Gum & Pitch Remover.)
2. Elevation screw threads and pivot nut. (First Clean with
Craftsman Gum & Pitch Remover.)
3. Cradle bearing points.
4. Bearing points in guard assembly, miter gauge and rip
fence.
ELEVATION SCREW
I
I
I
\ /
ELEVATION SCREW
PIVOT NUT
/
/
TILT SCREW
\
TILT SCREW
PIVOT NUT
RECOMMENDED ACCESSORIES
IN CANADA, SEE YOUR LOCAL SIMPSONS-SEARS STORE
OR CATALOG FOR ACCESSORY SELECTION AND NUMBERS
ITEM
CAT.NO.
9-22235
Steel Legs ...............................
Steel Stand .............................. 9-22214
Retractable Caster Set for Steel Legs .......... 9-22200
Retractable Caster Set for Steel Stand ......... 9-22201
Solid Table Extension ...................... 9-29954
*7 in. Molding Head Set ............... 9-3217 9-3218
*7 in. Molding Head .......... . ............. 9-3214
Molding/Dado Insert for 7 in.
Dia. Molding or dado Head .................. 9-29933
9-2480
Work Light ...............................
ITEM CAT. NO•
• 9-2481
Work Light ..............................
7 in. Dia. Adjustable Dado Head ......... 9-3263 9-3267
7 in. Dia. Dado Head ....................... 9-3257
.9-4952
Blade Stabilizers ..........................
Sanding Wheel ............................ 9-2274
Miter-Gauge Stop Rods ..................... 9-29924
Miter-Gauge Hold-Down Clamp .............. 9-29928
9-3230
Hold-Down Set ............................
Taper Jig ................................. 9-3233
9-3231
Universal Jig ..............................
"Power Tool Know How Handbook" Table Saw .. 9-2918
The above recommended accessories are current and were
available at the time this manual was printed.
*Smaller Dia. Molding Heads cannot be used because they
do not provide adequate depth of cut.
27
Loading ...
Loading ...
Loading ...