Loading ...
Loading ...
Loading ...
Cleaning and care of the oven
67
Set the desired finish time using or
.
Confirm with OK.
The finish time is now saved.
The oven heating switches off.
The finish time can be changed at any
time up until the start time for the
program.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on. The duration will appear
in the display.
At the end of the Self Clean program
h
, , and will appear in the
display.
As long as lights up, the door is
locked. When flashes, the door is
unlocked.
When the door lock has been
deactivated:
- goes out.
- flashes.
- Short signals will sound if the audible
signal is switched on.
Turn the mode selector toOff.
The audible signal will stop and the
symbols on the display will go out.
Danger of injury caused by hot
surfaces.
At the end of the Self Clean program,
the oven will still be very hot. You
could burn yourself on the heater
elements and the oven
compartment.
Allow the heating elements and the
oven compartment temperature to
drop to a safe level before removing
any residues.
Clean the oven compartment to
remove any Self Clean residues (e.g.,
ash) that can build up depending on
the degree of soiling in the oven
compartment.
Most residues can be removed with
warm water, liquid dish soap, and a
clean sponge or a clean, damp
microfiber cloth.
Depending on how dirty the oven was
prior to cleaning, there may be a
visible layer of soiling across the inner
glass pane on the door. You can
remove this using the scouring side of
a dish sponge, a glass scraper, or with
a stainless steel spiral pad and liquid
dish soap.
Loading ...
Loading ...
Loading ...