Loading ...
Loading ...
Loading ...
23
ERROR CODES
When some malfunctions occur, the appliance will display error codes to warn you:
CODES MEANING POSSIBLE CAUSES
E0 Communication exception The display can't receive signal or the main board can't send signal
Contact customer service
E1 Longer inlet time Faucet is not opened
Water intake is restricted
Water pressure is too low
Improper or Incomplete Draining Drain Hose is extended more than 10 ft from the dishwasher
Drain Hose is not properly looped underneath sink or not installed with
air gap
Drain Hose is kinked, compressed or otherwise damaged
Wrong Drain Hose used (use only supplied Sharp Dishwasher Drain
Hose)
E4 Overow Some element of dishwasher leaks
E8 Failure of orientation of distributary valve Open circuit or break of distributary valve
E9 Holding a button for longer than 30 seconds Water or some other material on the button
WARNING
• If overow occurs, turn off the main water supply before calling for service.
• If there is water in the base pan because of an overll or small leak, the water should be removed before restarting the dishwasher.
Loading ...