Loading ...
Loading ...
Loading ...
9
Single Beer Kegerator/Beverage Cooler
www.insigniaproducts.com
Locating your kegerator
Before using your kegerator
• Let the kegerator stand upright for approximately eight hours before
connecting it to power. This reduces the possibility of a malfunction in
the cooling system from improper handling during transportation.
• Check to make sure that all accessories listed/shown are included with
your kegerator. If any accessories or parts are missing or not in good
condition, contact customer service for assistance.
• Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
• This kegerator is designed to be free standing only, and should not be
recessed or built-in.
• Place your kegerator on a floor that is strong enough to support the
kegerator when it is fully loaded.
• Allow three inches of space between the back and sides of the
kegerator and any surrounding walls. This allows for proper air
ventilation. If you install the casters, lock them. If not, adjust the
leveling feet to keep the kegerator level.
• Locate the kegerator away from direct sunlight and sources of heat
(stove, heater, radiator, and so on). Direct sunlight may affect the
acrylic coating and heat sources may increase electrical consumption.
Ambient temperature below 50°F (10°C) or above 85°F (29.4°C) will
hinder the performance of this kegerator. This kegerator is not
designed for use in a garage or any other outside installation.
• Avoid locating the kegerator in moist areas.
Providing a proper power supply
Check your local power source. This kegerator requires a 110V-120V, 60 Hz
power supply.
Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug that mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric
shock hazard from this kegerator.
3-prong receptacle
Receptacle box cover
3-prong plug
Grounding lead
Grounding adapter Receptacle box cover
Screw
Receptacle
Using a 3-prong plug and outlet Using a grounding adapter
Loading ...
Loading ...
Loading ...