Loading ...
Loading ...
Loading ...
19
Single Beer Kegerator/Beverage Cooler
www.insigniaproducts.com
Maintaining your kegerator
Your kegerator is designed for year-round use with only minimal cleaning
and maintenance.
When you first receive it, wipe the case with a mild detergent and warm
water, then wipe dry with a dry cloth. Do this periodically to keep your
kegerator looking new.
Cleaning the interior of your kegerator:
1 Turn off the kegerator and unplug it from the wall outlet.
2 Remove the keg and all beverages.
3 Wash the inside with a damp warm cloth soaked in a solution of one
quart of lukewarm water to two tablespoons of baking soda solution.
4 Wash the shelves and metal plate with a mild detergent solution.
5 Wring excess water out of the sponge or cloth when cleaning around
the controls or any electrical parts.
6 Wash the outside cabinet with warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.
7 Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
8 Dry the interior and exterior with a soft cloth.
Cleaning the beer components
To prevent a build-up of yeast and mold in the beer lines, and to prevent a
bad taste, clean your beer components when you replace a keg.
1 Remove the keg coupler and thoroughly rinse it in warm water.
2 Use the included wrench to remove the faucet on the draft arm
assembly. Insert the tip of the wrench into one of the holes on the
faucet, rotate it, then thoroughly rinse the faucet in warm water.
3 Clean the beer lines using either a hand pump cleaning kit or a
cleaning can (both sold separately).
Automatic defrosting
There is no need to defrost your kegerator. The defrost water collects at
the back of your cooler and passes through a drain outlet into a tray
located above the compressor where it evaporates.
Caution
To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.
Loading ...
Loading ...
Loading ...