Loading ...
Loading ...
Loading ...
12
NS-BK1TBK8
www.insigniaproducts.com
Installing the CO
2
regulator and tank
Before installing the CO
2
regulator and tank, it’s very important that you
review this list of safety tips.
1 Feed the hose clamp over one end of the CO
2
gas line.
2 Attach that end to the gas line connector on the CO
2
regulator.
3 Tighten the clamp to prevent leaks. Leave about ½ inch between the
top of the clamp and the end of the hose. You may need to squeeze
with a pliers or crimper.
WARNING
Before installing the CO
2
regulator and tank, it’s very important that you review this list
of safety tips:
• ALWAYS connect the CO
2
tank to a regulator. Failure to do so could result in explosion
with possible death or injury when the tank valve is opened.
• NEVER connect the CO
2
tank directly to the beer keg.
• ALWAYS follow correct procedures when tanks are changed.
• ALWAYS secure the tank in an upright position.
• NEVER drop or throw a CO
2
tank.
• ALWAYS keep a CO
2
tank away from heat. Store extra tanks in a cool place (preferably
70°F). Securely fasten with a chain in an upright position when storing.
• ALWAYS ventilate and leave the area immediately if CO
2
leakage has occurred.
• ALWAYS check the D.O.T. test date on the tank neck before installation. If the tank if
over five (5) years old, do not use it. Return the tank to the gas supplier.
• NEVER connect a product container unless there are two (2) safeties in the pressure
system:
•The CO
2
regulator is unpressurized.
• The product coupler and gas line are unpressurized.
Sankey keg
coupler
CO
2
tank regulator
Shut-off valve
Hose clamp
CO
2
gas line
Loading ...
Loading ...
Loading ...